POWERED MIXER EMX5016CF Owner's Manual

Before Turning On the Mixer
Connecting to Power
1	Be sure that the POWER switch is in the OFF position. 
2	Connect the included power cord to the AC IN connector on the rear panel. 
3	Plug the power cord into a standard power outlet. 

Turning the Unit On and Off

NOTE
To prevent an unpleasant burst of noise from the speakers, you should power up the sound sources first, and then the other devices in order of their distance from the source (starting with the closest).  
For example:	Sound source (external device) -> EMX unit -> Amps (Powered speakers)
When turning power off, proceed in the opposite order.
Before turning power on, make sure that the channel faders, ST master fader, AUX1/2  faders, ST SUB OUT control are all the way down. 

Push the POWER switch in to turn the power ON.
The model name "EMX5016CF" is shown in the GEQ display. To turn the power off, push the POWER switch again, so that the indication goes off.


This is the end of the file.
