POWERED MIXER EMX5016CF Owner's Manual

Rack Mounting
To prepare the unit for rack mounting, use the (separately sold) RK5014 rack mount kit.

CAUTION
If rack-mounting the unit, be sure to maintain adequate ventilation so the unit does not overheat. Consider attaching a vent panel, and do not use a sealed rack.

NOTE
The EMX unit requires 12U of rack space.

(Figure)
RK5014 Rack Mount Kit

How to install the rack-mount hardware
1	Use a screwdriver to remove the screws from the EMX unit.

2	Set the kit's two metal fittings into position, and screw them in using the screws (silver) included in the RK5014.

CAUTION
Do not use the screws (black) you just removed from the EMX unit.

3	Mount the unit into the rack, and fasten it into place.

CAUTION
Do not install the mixer near power amps or other heat-generating devices.


This is the end of the file.
