DM2000VCM Digitální produkční konzole Prodej ukončen

		DM2000VCM
Outline
Mixing capability	Mixing channels	96
	GROUP	8
	AUX	12
	MAIN	Stereo
	MATRIX	4 Stereo
	Input channel functions	Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan
	Output channel functions	Attenuator, 4-band PEQ, Compressor, Delay
	On-board processors	8x SPX multi effectors, 6x 31-band GEQs
I/O	Mic inputs	24
	Phantom power	+48V DC; ON/OFF per channel
	Line inputs	2x 2tr in
	AD converter	24-bit; 128-time over sampling
	Line outputs	Stereo output, Studio monitor output, 2x C-R monitor output, 8x Omni output
	DA converter	24-bit; 128-time over sampling
	Digital I/O	3x 2tr in/out, Cascade I/O
	Expansion slots	6x Mini-YGDAI (16-in/16-out)
	Control and others	To Host(USB/Serial), Control(GPI), Remote, MIDI, Time code in (SMPTE/MTC), Keyboard, Word clock in, 2x Word clock out, Smart media slot, 2x Lamp on MB2000 optional meter bridge
General specifications
Internal processing		32bit, Accumulator: 58bit
Sampling frequency rate	Internal	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sampling frequency rate	External	44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay		Less than 2.3ms (@48kHz), Less than 1.2ms (@96kHz)
Total harmonic distortion		Less than 0.05% (20Hz-40kHz)
Frequency response		0, +0.5, -1.5dB 20Hz-40kHz
Dynamic range		DA: 110dB; AD+DA: 108dB
Hum & noise level	Equivalent input noise	-128dBu
Hum & noise level	Residual output noise	-94dBu
Crosstalk		-80dB
Power requirements		AC100V, 120V, 220-240V 50/60 Hz
Power consumption		300W
Dimensions	W	906mm; 35-11/16in
	H	257mm; 10-1/8in
	D	821mm; 32-5/16in
Net weight		43kg; 94.8lbs
Accessories		Owner’s Manual, Studio Manager Installation Guide, AC power cord

Analog Input Characteristics

Input terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Input Level			Connector
Input terminal	PAD	GAIN	Actual Load Impedance	For Use with Nominal	Sensitivity	Nominal	Max. before clip	Connector
CH INPUT A/B 1-24	0	-60dB	3kohms	50-600ohm Mics & 600ohm Lines	-70dB	-60dB	-46dB	A:XLR3-31 type(Balanced) B:TRS Phone jack (Balanced)
	0	-16dB			-26dB	-16dB	-2dB
	26	-16dB			0dB	+10dB	+24dB
INSERT IN 1-24			10kohms	600ohm Lines	-6dB	+4dB	+18dB	TRS Phone jack(Balanced)
2TR IN ANALOG1(L,R)			10kohms	600ohm Lines	+4dB	+4dB	+18dB	TRS Phone jack (Balanced)
2TR IN ANALOG2(L,R)			10kohms	600ohm Lines	-10dBV	-10dBV	+4dBV	RCA pin jack (Unbalanced)

In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
In these specifications, when dBV represents a specific voltage, 0 dBV is referenced to 1.00 Vrms.

Analog Output Characteristics

Output Terminal	Actual Source Impedance	For Use with Nominal	GAIN SW	Output Level		Connector
Output Terminal	Actual Source Impedance	For Use with Nominal	GAIN SW	Nominal	Max. before clip	Connector
STEREO OUT(L,R)	600ohms	10kohm Lines	-	-10dBV	+4dBV	RCA pin jack (Unbalanced)
STEREO OUT(L,R)	75ohms	600ohm Lines	-	+4dB	+18dB	XLR3-32 type (Balanced)
STUDIO MONITOR OUT(L,R)	150ohms	10kohm Lines	-	+4dB	+18dB	TRS Phone jack (Balanced)
C-R MONITOR OUT LARGE(L,R)	75ohms	600ohm Lines	-	+4dB	+18dB	XLR3-32 type (Balanced)
C-R MONITOR OUT SMALL(L,R)	75ohms	600ohm Lines	-	+4dB	+18dB	XLR3-32 type (Balanced)
OMNI OUT 1-8	150ohms	10kohm Lines	+18dB (default)	+4dB	+18dB	TRS Phone jack (Balanced)
OMNI OUT 1-8	150ohms	10kohm Lines	+4dB	-10dB	+4dB	TRS Phone jack (Balanced)
INSERT OUT 1-24	600ohms	10kohm Lines	-	+4dB	+18dB	TRS Phone jack (Balanced)
PHONES	100ohms	8ohm Lines	-	4mW	25mW	ST Phone jack (Unbalanced)
PHONES	100ohms	40ohm Lines	-	12mW	75mW	ST Phone jack (Unbalanced)

In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
In these specifications, when dBV represents a specific voltage, 0 dBV is referenced to 1.00 Vrms.

Digital Input Characteristics

Terminal		Format	Data Length	Level	Connector
2TR IN DIGITAL	1	AES/EBU	24bit	RS422	XLR3-31 type(Balanced)
	2	AES/EBU	24bit	RS422	XLR3-31 type(Balanced)
	3	IEC-60958	24bit	0.5Vpp/75ohms	RCA pin jack
CASCADE IN		-	-	RS422	D-sub Half Pitch Connector 68P (female)

Digital Output Characteristics

Terminal		Format	Data Length	Level	Connector
2TR OUT DIGITAL	1	AES/EBU (Professional use)	24bit	RS422	XLR3-32 type (Balanced)
	2	AES/EBU (Professional use)	24bit	RS422	XLR3-32 type (Balanced)
	3	IEC-60958 (Consumer Use)	24bit	0.5Vpp/75ohms	RCA pin jack
CASCADE OUT		-	-	RS422	D-sub Half Pitch Connector 68P (female)