MTX/MRX series are designed primarily for multi-zone commercial installation and are equipped with flexible processing functions that are essential to a wide variety of application. This is an introduction to Yamaha’s MTX and MRX DSP processor.
A closer look at the inputs and outputs of the MTX and MRX processors and provide an overview of the processing available in each one.
MTX Overview 1
This video will give an introduction to the Yamaha MTX Series (MTX3, MTX5-D).
MTX Overview 2
A further look to the Yamaha MTX Series (MTX3, MTX5-D) as well as a guide to the simple editing software MTX-MRX Editor.
The Dan Dugan algorithm clearly share the mic gain between the microphone without any audible signs of gating or other artefacts. We will take a further look into the Dan Dugan Automixer or MTX/MRX processors.
FBS ( Feedback Suppressor )
This video will explain how the FBS on MRX and MTX processor works to prevent feedback effectively.
Introduction of Remote Control
MTX/MRX system provides a various solutions of the remote control. This video will give a brief introduction to these solutions.
Wall-Mount Controller MCP1
The Yamaha MCP1 is an advanced wall-mount controller for controlling an MTX or MRX System. It allows the user to control their system remotely with more functions than a DCP and with a higher security level. This video will show you how to set up the MCP1 to the system.
Digital Control Panel - DCP Series
Digital Control Panel (DCP) is a simple solution to control all the sophisticated programming of MTX/MRX processor. Let's take a closer look at the features and learn how to setup the DCPs with the MTX-MRX Editor.
Digital Controller Hub - DCH8
DCH8 extends the flexibility of the DCP's configurations. Take a closer look to the device and learn how to connect the DCPs together with DCH8.
Wireless DCP extends the flexibility with the use of smart devices. It provides the same functions of DCP while no cabling is required. This video will explain how to setup the Wireless DCP.
01 How to setup and create RCSL file with MTX-MRX Editor
ProVisionaire Touch is a powerful remote control solution of MTX/MRX that allows user to customise the user interface completely. Let's take a closer look to the features and learn how to setup and create RCSL file with MTX-MRX Editor.
02 How to design the user interface
ProVisionaire Touch is a powerful remote control solution of MTX/MRX that allows to user to customise the user interface completely. Let's learn how to design the user interface.
03 How to assign parameters and get provisionaire touch online
ProVisionaire Touch is a powerful remote control solution of MTX/MRX that allows to user to customise the user interface completely. Let's learn how to get online with the MTX/MRX processor.
04 More features of ProVisionaire Touch
ProVisionaire Touch allows user to control various Yamaha products, including the Blue-ray players and CD players/AV Receivers with MusicCast enabled, as well as "Disklavier Enspire" reproducing pianos. Let's take a further look at the features of ProVisionaire Touch.
Yamaha's PGM1/PGX1 are paging stations that can be used with the MTX5-D or MRX7-D. It can be networked via a Dante Network and using Power Ethernet or PoE. This video will show you how to set up the paging station to the system.
Dante je audio síťová technologie vyvinutá společností Audinate. Dante zařízení na stejné síti automaticky detekují další zařízení. Tím lze zjednodušit nastavení systému a snížit tak jeho komplexnost a potenciální chyby. V tomto smyslu lze Dante považovat za síťovou technologii typu plug-and-play.
Tato příručka se více zaměřuje na návrh sítí (network design) než na základní specifikace jednotlivých produktů a Dante sítě.
Tento dokument popisuje obecné instrukce pro propojení Yamaha Dante zařízení se zařízeními třetích stran, které nejsou vybaveny Dante AES67.