VXS série

A carton of the full-range VXS/VXC models will contain 2 units, a carton for the VXS10S subwoofer models will contain a single unit.

Yes. For details, please refer to the "Speaker system painting guide".

Each model features a rotary tap selector switch. For VXC models this is found underneath the grill on the baffle plate, for VXS models this is found on the rear panel.

Yes, rotation and removal of the logo are both possible.

Yes, a PolySwitch is used to protect the drivers.

Yes, the VXS series comes with a dedicated installation bracket as standard. Both VXS and VXS-VA models use the same bracket.

Yes, the bracket can be adjusted on both vertical and horizontal axis (tilt and pan).

Yes, using the supplied bracket (except for the VXS10S/ST subwoofer models).

Yes, the VXS Series is rated to IP35 dust and water protection, except when mounted on a ceiling where the rating will be IP34.

Yes, you can use any bracket with a 60mm mounting pitch and a load capability which exceeds the weight of the VXS Series.

Yes, an eyelet is provided on the rear panel to attach a suitable safety wire.

The flammability rating, IP rating and frequency characteristics have been changed to meet EN54-24 requirements. The VA models share the same high quality audio characteristics as the standard models, allowing for dual use in both music reproduction and emergency Voice Alarm applications.

Certified to EN54:16:2008. Complies with EN60849:1998 and ISO7240-24.