SWX2320 Firmware V2.05.16
Important Notice
- Be sure to read the following before updating V2.05.13 or earlier software.
- Countermeasures were implemented to address OpenSSL vulnerabilities.
CVE-2023-2650(JPCERT/CC JVNVU#94584169)
How to Update Firmware
For more detailed information, refer to the latest version of the Yamaha LAN Monitor User Guide and the Web GUI Help information.
Updating from Yamaha LAN Monitor V1.8.6 and Later Versions
- Connect the SWX2320 and the computer, using a LAN cable.
Please connect to a port on the SWX2320 which has been assigned to VLAN1. - Start the Yamaha LAN Monitor.
- Change the LAN Monitor display to [List] mode.
- Click the [Firmware Update] tab. (Loading the firmware might take a while if multiple units are connected.)
- Select the switch to be updated.
- Click the [Firmware Update] button.
- Click the [Browse] button to select the downloaded and decompressed firmware file with a “.bin” extension.
- Click the [Execute] button.
Updating from Yamaha LAN Monitor Versions Earlier Than V1.8.6
- Connect the SWX2320 and the computer, using a LAN cable.
Please connect to a port on the SWX2320 which has been assigned to VLAN1. - Start the Yamaha LAN Monitor.
- Select the SWX2320 to be updated in the tree view.
- Click the [Web GUI] button on the device detail view.
The username and password are not specified with the factory settings, so entering a username and password is not necessary in this case.
Note: If updating from V2.05.13 or a later version, log in by entering the previously specified authentication information. - Select [Management] -> [Maintenance] -> [Update firmware], then click the [Next] button on "Update firmware from PC."
- Click the [Select a file] button, then select the downloaded and decompressed firmware file with extension “.bin”.
- Click the [Confirm] button.
- Click the [OK] button.
Wait until completing the update. SWX2320 will automatically restart and become ready to use.
Main Revisions and Enhancements
New Functionality
- sFlow function was added.
This function setting page was added to the Web GUI management page. - The “Find this switch” function in the ADECIA security enhancement was added.
- The RMON function setting page was added to the Web GUI management page.
Improvements
- The loop detection function works on logical interfaces.
- In the ADECIA security enhancement, the automatic device recognition function works even when an IGMP querier does not exist.
- Dante optimization setting by LLDP is no longer automatically applied when the stack is enabled.
- Revised the settings to apply the “Dante optimization” settings by LLDP automatically.
- The LLDP function and basic management TLVs are enabled in the Web GUI's “Dante optimization” settings.
- The following wording in the Web GUI was changed:
- the wording of "Admin Password" and "Administrator Password" to "Privileged Password”
- wording when CONFIG is saved
- unified the wording
Fixed Bugs
- Fixed a bug in 802.1X authentication that could cause a reboot when receiving a large EAP fragment size RADIUS packet.
- Fixed a bug that could cause stack disconnections when loops were detected.
- Fixed a bug in the ADECIA security enhancement that caused communication to fail in rare cases when security settings were disabled.
- Fixed a bug that could prevent communication by MAC authentication when all FDB entries are cleared, such as when the stack is reconfigured.
- Fixed a bug in the SNMP function that the correct value could not be obtained when acquiring the private MIB of the loop detection information.
- Fixed a bug when a stack member was displayed on the Web GUI dashboard if a period with no data was selected from [Day],[Month],[Year] in the Resource Information and Power Consumption Information gadgets. It took time to switch screens, and an error log was outputted.
- Fixed a bug in which some configuration screens in [Layer2 Functions]-[Spanning Tree] of the Web GUI's advanced settings were garbled when displayed in English.
- Fixed a bug in the following screens of the Web GUI management that the setting values were sometimes not reflected in the setting screens.
- [SNMP]-[MIB]-[Management Information Settings].
- [SNMP]-[Community]-[List of Communities]
- [SNMP]-[SNMPv3 User]-[MIB View List]
- [SNMP]-[SNMPv3 User]-[Group List]
- [SNMP]-[SNMPv3 User]-[User List]
- [SNMP]-[SNMP Trap]-[Trap Type to Send]
- [SNMP]-[SNMP Trap]-[List of Traps Destinations]
- [LLDP]-[System Settings]
- [LLDP]-[Interface settings]
- [Mail Notification]-[List of Registered Mail Servers]
- [Mail Notification]-[List of Mail Notifications Settings]
- [Terminal Monitoring]-[List of Monitored Terminals]
- [PTP]-[System Settings]
- [PTP]-[Interface Settings]
- Errors have been corrected with the help of the English display of the Web GUI.
Licenční smlouva a stažení souboru
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY ABORT USING THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Subject to the terms and conditions of this Agreement, Yamaha hereby grants you a license to use copy(ies) of the software program(s) and data ("SOFTWARE") accompanying this Agreement, only on a computer, musical instrument or equipment item that you yourself own or manage. The term SOFTWARE shall encompass any updates to the accompanying software and data. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
2. RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
- You may not use the SOFTWARE in any manner that might infringe third party copyrighted material or material that is subject to other third party proprietary rights, unless you have permission from the rightful owner of the material or you are otherwise legally entitled to use.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or provision of this Agreement is violated, this Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately abort using the SOFTWARE and destroy any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
5. LIMITATION OF LIABILITY
YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. OPEN SOURCE SOFTWARE
This SOFTWARE may include the software or its modifications which include any open source licenses, including but not limited to GNU General Public License or Lesser General Public License ("OPEN SOURCE SOFTWARE"). Your use of OPEN SOURCE SOFTWARE is subject to the license terms specified by each rights holder. If there is a conflict between the terms and conditions of this Agreement and each open source license, the open source license terms will prevail only where there is a conflict.
7. THIRD PARTY SOFTWARE AND SERVICE
Third party software, service and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. IF, in the written materials or the electronic data accompanying the software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the terms of any agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein.
8. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. All legal notices, notice of disputes and demands for arbitration, and any other notice which purports to change these provisions or to assert legal entitlements must be sent in writing to:
Yamaha Corporation
10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Shizuoka, 430-8650, Japan
9. ENTIRE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement.
10. AMENDMENT
Yamaha may amend, revise or update this Agreement at its discretion. Any change or update that Yamaha makes to this Agreement will be effective after you agree with the updated terms of this Agreement or use this SOFTWARE.
Last updated :January 28, 2020